Drain Pump Series 104, 105, 110, 115, 120, 131, 132

Zoeller Specialty Pumps

Removes water from areas where gravity flow is not available.

• Applications include laundry tray pump, wet bar sink, lavatory, air conditioning condensate and dehumidifier water removal. Can also be used in conjunction with dishwashers and garbage disposal applications.
• No inlet filters or screens to clean
• Optional top or side inlet
• Can be installed with internal trap
• Automatic pumps with tank cord seals
• All hardware for easy assembly
• Polypropylene basin and lid
• Internal discharge pipe to lid (trap supplied by others)
• Check valve (30-0181, not included with model 104)
• Contact factory for additional inlet option or high head applications
• Easy installation, no need to dig a sump
• 132 comes preassembled

 

Drain pump Series	Model Pump with Basin
104*	M72
105	M53
110	M55
115	M57
120	M59
131	M98
132*	M72

 

Pump features (models 53, 55, 57, 59, 98):

• Passes laundry lint
• Automatic, float operated mechanical switch
• 115V/1 Ph, all drain pump series
• 9 ft. UL listed 3-wire cord and plug (15 ft. cord standard on model 98)
• Stainless steel screws, guard, handle and switch arm
• Passes ½” spherical solids
• 1 ½” NPT discharge
• 1550 RPM, 60 Hz on 50 series models
• 1725 RPM on model 98
• Non-clogging vortex impeller
• Glass-filled, polypropylene base with built in strainer on M53 and M55.
• Model 59, all bronze construction
• Models 57 and 98 all cast iron construction
• Temperature rated 130°F
• UL Listed pump

Model 72:

• Passes laundry lint
• 115V/1 PH, all drain pump series
• 9 ft. UL listed 3-wire cord and plug
• Stainless steel screws, switch arm and lower motor housing
• Oil free
• Passes 3/8” spherical solids
• 1 ½” NPT discharge
• 3400 RPM
• Non-clogging vortex impeller
• Temperature rated 110°F
• cCSAus certified pump

Basin:

• Polypropylene construction
• Corrosion resistant
• High capacity
• Gasket sealed polypropylene lid
• 2” NPT vent
• 1 ½” NPT discharge
• 1 ½” compression slip fit for top and side intake Note: 132 comes preassembled, for side inlet only
• Threaded connections for easy installation
• May be installed with internal trap for space savings
• Gas tight cover
• Temperature rated 130°F
• Fits under most sinks
• Basin passes 10’stack test – Models 104 and 132 will not pass 10’ stack test

Check valve (excluding model 104)(30-0181)

• “Full Flow” design
• 1 ½” or 1 ¼: slip x slip union
• PVC construction
• For additional specifications, see FM0217

  Horsepower:  (50 series and model 72) .3, (model 98) 1/2 HP

  Volts:  115 V

  Hertz:  60 Hz

  Phase:  Single Phase

  RPM:  (53, 55, 57, 59) 1550, (98) 1725 or (72) 3400 RPM

  Impeller Type: Non-clogging vortex impeller

  Cord Length: 9 ft, (15 ft. standard on 98)

  Cord Type: UL listed, 3-wire cord and plug

  

  Pump Performance Curve Drain Pumps

  Total Dynamic Head GPM Installation Options Tank Specifications Literature/Documents FM2335 Catalog Sheet Drain Pump 104, 105, 110, 115, 120, 131, 132 FM2336 Installation Instructions Internal Trap Drain Pump Installation Ins. FM2113 Installation Instructions for Model 132 Preassembled Drain Pump FM0935 Drain Pump Spec Sheet

  To purchase Zoeller pumps, accessories and water treatment equipment go to our online store, to get a custom quote via email; info@water-services.usor use the online form, or call +1-801-225-1180.